Logout نمودن کامپیوتر در برد Arduino Leonardo

#define OSX 0 
#define WINDOWS 1 
#define UBUNTU 2  
#include "Keyboard.h"  
// change this to match your platform: 
int platform = OSX;  void setup() 
{   
    // make pin 2 an input and turn on the  
    // pullup resistor so it goes high unless   
    // connected to ground:   
    pinMode(2, INPUT_PULLUP);
    Keyboard.begin(); 
} 
void loop() 
{   
    while (digitalRead(2) == HIGH) 
    {     
        // do nothing until pin 2 goes low     
        delay(500);   
    }   
    delay(1000);    
    switch (platform) 
    {     
        case OSX:       
        Keyboard.press(KEY_LEFT_GUI);       
        // Shift-Q logs out:       
        Keyboard.press(KEY_LEFT_SHIFT);       
        Keyboard.press('Q');       
        delay(100);       
        Keyboard.releaseAll();       
        // enter:       
        Keyboard.write(KEY_RETURN);       
        break;     
        case WINDOWS:       
        // CTRL-ALT-DEL:       
        Keyboard.press(KEY_LEFT_CTRL);       
        Keyboard.press(KEY_LEFT_ALT);       
        Keyboard.press(KEY_DELETE);       
        delay(100);       
        Keyboard.releaseAll();       
        //ALT-l:       
        delay(2000);       
        Keyboard.press(KEY_LEFT_ALT);       
        Keyboard.press('l');       
        Keyboard.releaseAll();       
        break;     
        case UBUNTU:       
        // CTRL-ALT-DEL:       
        Keyboard.press(KEY_LEFT_CTRL);       
        Keyboard.press(KEY_LEFT_ALT);       
        Keyboard.press(KEY_DELETE);       
        delay(1000);       
        Keyboard.releaseAll();       
        // Enter to confirm logout:       
        Keyboard.write(KEY_RETURN);       
        break;   
    }   
    // do nothing:   
    while (true);
    }

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

پانزده − پنج =